Offroad or desert driving. If equipped for and operated with E-85 (ethanol) fuel. Grand Cherokee WK maintenance schedules. Maintenance schedule Grand Cherokee (North America) – PDF file. Maintenance schedule Grand Cherokee (europe) – PDF file. Maintenance schedule Grand Cherokee (middle east / China) – PDF file.
3 Wait two minutes. (do not skip this step!) 4. Reconnect battery. 5. Start car, look at light, drive around block a few times and stop at corner store and buy some smokes and a JP magazine. 6. Drive home. 7. look at light.
Pressand hold the OK button. Finally, we’re going to press and hold down the ok button. That’s what will reset it, so press and hold that down. Restart your car. Turn the ignition off and start the engine to verify the indicator has been reset. Quick and Easy Guide: Resetting the Oil Change Light in Your Jeep Wrangler (2008-2023 Models
Toreset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. How do you reset oil service light Jeep Grand Cherokee SRT-8 for vehicles Equipped With Keyless Enter-N-Go. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/ RUN position
Thefirst step would be to find out if your vehicle has an oil life monitor. The best place to find out is your owner’s manual. Take a look at how your oil life monitor communicates. Some will simply turn on a light in your dash,
2018Grand Cherokee SRT - "Scarlett" 2016 Grand Cherokee Summit V8 - Sold with a quality conventional oil and filter, do not reset the oil change reminder, and then change it again when the oil change reminder goes off for the first time. 2014 Jeep GC Limited 4X4 V8 QD2 2012 Cadillac CTS-V Coupe 2011 Chevy Corvette Z06/07. Save
BrianEslick from How to Automotive takes you step-by-step through the process of resetting the oil change required light on a 2010 Jeep Grand Cherokee.
replacingyour car’s battery. , drive the car for about 20 to 30 minutes to reset the computer and charge the new battery before reprogramming your radio and anti-theft systems. QUICK LOOK. Most cars need a new battery every three to five years. When you replace the battery, certain systems such as the electronic control unit are reset and
Thefirst method is to reset the oil change indicator by turning the ignition on/off in the on/run mode of the engine without starting it. In the instrument cluster display, look for “Oil Life” and then “Vehicle Info.”. Hold down the OK button until the oil life gauge has been reset to 100%.
Thisvideo is about HOW TO: reset OIL CHANGE REQUIRED light on 2008 Jeep Grand Cherokee step-by-step through the process of resetting the oil change required
xPezDKT.